The RC−76R is a 6−button control keypad that fits into standard 1 gang US wall junction boxes. Connected over Ethernet to Site−CTRL™ remote AV control, site management & monitoring system, as well as LAN−connected control gateways for extended controlled devices capacity, and over KNET™ to master room controller and auxiliary keypads for remote keypad control, it can flexibly serve either as a standalone room controller, part of a multi−unit KNET™ system, or part of a multi−unit Ethernet system managed by the Kramer Site−CTRL™ site management platform. The RC−76R is ideal for auditoriums and meeting rooms, for convenient control of their complex multimedia systems and other room facilities such as screens, lighting and shades. DECORA® design frames included in US−D model.* DECORA® is a registered trademark of Leviton Manufacturing Co., Inc

•  - Back Lit & Label Capable Buttons — 6 RGB–color, tactile feedback, backlit buttons.

•  - Custom Labeled, Removable Button Caps.

•  - 1 K–NET™ Connector — Connect to master room controller, and auxiliary keypads for remote keypad control.

•  - K–NET™ Single Link Connection — Provides a single keypad link cable–connectivity, carrying both power and keypad control communication information.

•  - 1 RS–485 Bi–directional Control Port — Control devices via RS–485 control protocols.

•  - 2 RS–232 Bi–directional Control Ports — Control a device via bi–directional serial control protocols.

•  - 2 IR Emitter Control Ports — Control a device via IR control protocols.

•  - 1 GPI/O Control Port — Controls a device via general purpose I/O ports, program–configured as digital input, digital output or analog input interface for controlling sensors, door–locks, audio volume and light dim level, or lighting control devices.

•  - 2 Relay Control Ports — Control a device via relay contact closure, such as scrolling up and down screens, drapes, shades, and blinds.

•  - IR Sensor Port — Learns commands from IR remotes.

•  - Program Control — Program configuration with Kramer K–Config software.

•  - Kramer Site–CTRL™ Compatibility — For network management and remote control over the Ethernet port.

•  - Keypad Lock–Out — Option for tampering prevention by locking and unlocking of the keypad buttons.

•  - Mini USB Port — To upload configuration files, set the K–NET™ ID number, and power the device during configuration.

•  - Mounting — In–wall, in standard 1 gang US junction box size.

•  - Easy Installation — Fits standard in–wall boxes for simple and cost–reducing installation.

INPUTS

• 1 RS–485, 2 RS–232, 1 GPI/O, 1 K–NET on terminal block connectors, 1 Ethernet on an RJ–45 connector, 1 infrared sensor, 1 mini USB for programming

OUTPUTS

• 2 IR emitter, 2 relays (36V AC or DC, 2A, 60V AC maximum on non–inductive load) on terminal block connectors

DEFAULT IP SETTINGS

• IP number — 192.168.1.39

• Mask — 255.255.0.0

• Gateway — 0.0.0.0

POWER CONSUMPTION

• 12V DC, 570mA

OPERATING TEMPERATURE

• 0° to +40°C (32° to 104°F)

STORAGE TEMPERATURE

• –40° to +70°C (–40° to 158°F)

HUMIDITY

• 10% to 90%, RHL non–condensing

INCLUDED ACCESSORIES

• Power supply, black and white DECORA® design frames, black and white mounting plates, label set (label size: 8.8mm x 8.8mm), screwdriver